CCT Routing and Switching 100-490 Dumps is the Cisco 100-490 RSTECH exam material for launching your career in cybersecurity operations.
leads4pass 100-490 Dumps Prepares Candidates for Cisco RSTECH Exam Questions and Answers
https://www.leads4pass.com/100-490.html helps you earn the Cisco CCT Routing and Switching Exam Certification.
Cisco technology is spread all over the world. This means that CCT Routing and Switching certified professionals will continue to be sought after, as long as you ensure that you can successfully achieve the CCT Routing and Switching 100-490 certification. Use the CCT Routing and Switching 100-490 dumps to guarantee your success with the Cisco CCT Routing and Switching exam certification.
CCT Routing and Switching exam FAQs: About, Value, Exam Material
About 100-490 RSTECH: What You Need to Know
The cool thing about the CCT is that if you’re just getting into networking, like, I mean, just getting into networking, you don’t know what an IP address or what a switch is, for instance, the CCT is a great certification to help break down the fundamentals. Cisco has actually had the CCT out for a while.
This is fantastic if you believe that to be the case because the CCT begins with the fundamentals and develops from there. Rob, what about the CCNA, you ask? Well said! After completing the CCT, you would essentially move on to the next certification in the Cisco lineup, the CCNA. You should have a fundamental level of knowledge when you enroll in CCNA because that is sort of what is expected of you.
The CCT certification from Cisco introduces you to the fundamentals of the industry. So, if you’re wondering what layer two is or if you don’t really understand what an IP address or a switch is. You should therefore ask yourself these questions.
But if you find yourself saying, “I don’t know anything about networking,” remember that I have been in your shoes before. Yes, I have a CCIE. However, do you know what? I once believed that I would never be able to pass my CCNA exam. I had to retake the exam three times. It is a serious certification, then.
Having stated that, this is where CCT is useful. We must comprehend what it includes. CCT is intended to concentrate on the fundamentals, correct? You’ll be visiting a location where Cisco routers, switches, and firewalls will be installed. Therefore, your objective and task would be to physically travel to a location and be able to recognize a router or switch. Someone from the engineering team may be on the phone and say, “Hey, we need you to take and unbox this switch and you place it in the rack, connect it up, and power it on, but there may not be any configuration on it.” So, how do you proceed from there?
since these kinds of things are covered by the CCT. In fact, you can examine the configuration of the already-installed gadget. Just copy it. Perhaps the technical team provided you with a text file with a copy that you already have. You duplicate that into the CLI where you saved the configuration, and then presto! You have life. What an awesome thing, yes?
These are the things that the CCT will enable you to comprehend and deal with. It is extremely potent because of this. For anyone who will be performing technician-level work, this is crucial information that many servers and upper-level certifications ignore. What is the most important thing an entry-level individual needs to accomplish, including myself and architects who have been networking and doing other things for ten years or more?
You need to get your hands on the equipment, but doing so can be scary. You know what, though? We don’t want to intimidate anyone. Oh yes, no big deal, that is how we want it to sound. Pick up a PC or a laptop. The same idea is relevant.
Did you know that a router or switch is basically a computer without a graphical user interface (GUI), which allows you to interact with it by clicking around?
An operating system, a CPU, and RAM are all still present. It makes a good effort, no? And while attempting to comprehend what it is that equipment does, you certainly want to pay attention to it. CCT puts a lot of emphasis on those specifics.
When it comes to concentrating on CCT routing and switching, the new CCNA(200-301) has superseded all of the pre-existing certifications, for those of you who are following the new Cisco paradigm shift and their certification program. The CCNA Security, CCNA Routing and Switching, and the CCNA Service Provider have all been retired, hence they are all no longer available. The CCT route switch will now offer that fundamental support. Do you recall the CCENT qualification, which stands for Cisco Certified Entry-Level Network Technician? Guess what, this qualification is essentially this.
So if you want something Cisco-focused to start with. CCT is the way to go because it isn’t networking plus but isn’t quite as daunting or as large of a beast as CCNA is. With only 55 questions, it is a lot smaller certification. To take the exam, you must register on Pearson Vue for roughly $120 (USD).
So what is covered by CCT? CCT covers the following four topics: 25% of the certification, or general networking knowledge, is already in your possession.
You have Cisco hardware and accompanying equipment, which makes up roughly 20%; these two are enormous, It’s important to be able to distinguish between a switch and a router and to be able to recognize them.
How does Cisco iOS software operate, which makes up 29% of the exam? It’s crucial to comprehend it as well.
Service-Related Knowledge is the next. That is almost 26%. So you get a 100% when you add them all up.
You should pay close attention to that when you consider what you will need to learn in order to pass the exam, making sure you comprehend each bullet item and the blueprint.
Now, a 90-minute exam with 55 to 65 questions and $125 USD for the exam fee isn’t that bad, is it?
Vendor: Cisco
Exam Code: 100-490
Exam Name: Supporting Cisco Routing & Switching Network Devices (RSTECH)
Certification: CCT Routing and Switching
Languages: English and Japanese
Price: $125 USD
Duration: 90 mins
Number of Questions: 55-65 questions
Passing score: 80% Approx
100-490 dumps (PDF and VCE): https://www.leads4pass.com/100-490.html (CCT Routing and Switching exam dumps maps to Cisco 100-490 RSTECH exam objectives)
100-490 dumps (Number of Questions): 60 Q&A
Last update time: Sep 30, 2022
Free share of a portion of the CCT Routing and Switching 100-490 RSTECH exam material
| Number of exam questions | Exam name | From | Release time |
| 15 | Supporting Cisco Routing & Switching Network Devices | leads4pass | Oct 08, 2022 |
New Question 1:
Which protocol does TFTP typically use for transport?
A. RSVP
B. TCP
C. HTTP
D. UDP
Correct Answer: D
New Question 2:
What is the correct IPv6 address notation?
A. 2001:0DB8::/128
B. 2001:0DB8:0::
C. 2001:0DB8::1:1:1:1:1
D. 2001:0DB8:130F:0000:0000:7000:0000:140B
Correct Answer: D
New Question 3:
Which address facilitates the routing of packets over an IP network?
A. physical
B. transport
C. network
D. MAC
Correct Answer: C
New Question 4:
What are the two components of a WAN connection? (Choose two.)
A. CSU/DSU
B. router
C. bridge
D. hub
E. switch
Correct Answer: AB
New Question 5:
Which device is a DTE device?
A. CSU/DSU
B. router
C. cable modem
D. DSL modem
Correct Answer: B
New Question 6:
Which layer of the OSI model defines how data is formatted for transmission and how access to the physical media is controlled?
A. presentation
B. data link
C. network
D. transport
Correct Answer: B
New Question 7:
Which command shows the status of power supplies and sensor temperatures?
A. show hardware
B. show module
C. show environment
D. show diag
Correct Answer: C
Reference: https://www.cisco.com/c/m/en_us/techdoc/dc/reference/cli/n5k/commands/show-environment.html
New Question 8:
Which two pairs of LAN Ethernet devices use an RJ-45 straight-through cable? (Choose two.)
A. switch-to-switch
B. switch-to-router
C. switch-to-hub
D. router-to-router
E. switch-to-server
Correct Answer: BE
New Question 9:
Which two features are associated with single-mode fiber-optic cable? (Choose two.)
A. consists of a single strand of glass fiber
B. has higher attenuation that multimode fiber
C. carries a higher bandwidth that multimode fiber
D. costs less than multimode fiber
E. operates over less distance than multimode fiber
Correct Answer: AC
New Question 10:
What is the line speed of a DS0 in North America?
A. 16 kbps
B. 32 kbps
C. 64 kbps
D. 128 kbps
Correct Answer: C
New Question 11:
Which two ports on a laptop are used to gain console access to a Cisco switch? (Choose two.)
A. DB-9
B. USB
C. DVI
D. RJ-11
E. RJ-45 Ethernet
Correct Answer: AB
New Question 12:
Which two statements about a SmartJack are true? (Choose two.)
A. It provides signal conversion.
B. It acts as a concentration point for dial-in and dial-out connections.
C. It operates at Layer 2 of the OSI model.
D. It provides channel testing.
E. It regenerates the signal to compensate for signal degradation from line transmission.
Correct Answer: AE
New Question 13:
The colored wires at one end of a cable are in reverse sequence to the colored wires at the other end of the cable. Which cable does this configuration describe?
A. rolled
B. crossover
C. coaxial
D. straight-through
Correct Answer: B
New Question 14:
Which Cisco CPAK 100GBASE module supports Multimode Fiber cable?
A. Cisco CPAK-100G-CWDM4
B. Cisco CPAK-100G-LR4
C. Cisco CPAK-100G-ER4L
D. Cisco CPAK-100G-SR4
Correct Answer: D
New Question 15:
How many pairs of copper wire does a UTP cable have?
A. 2
B. 3
C. 4
D. 5
Correct Answer: C
…
[Free Download] CCT Routing and Switching 100-490 RSTECH exam material:
https://drive.google.com/file/d/12tShRxvow6UT–ZH4yCiDDT-tDXD18iy/view?usp=sharing
The above are free to share 15 100-490 RSTECH exam material, check this link to get more exam questions and answers.