With the help of latest and authentic Microsoft MCSE 70-411 dumps exam questions, you can find the best 70-411 exam preparation kit here and you will also get the 100% guarantee for passing the Microsoft exam. “Administering Windows Server 2012” is the name of Microsoft MCSE https://www.leads4pass.com/70-411.html exam dumps which covers all the knowledge points of the real Microsoft exam.
The best and most updated latest Microsoft MCSE 70-411 dumps exam training resources in PDF format download free try from leads4pass. Helpful newest Microsoft MCSE 70-411 dumps vce youtube demo update free shared. If you are looking to get Microsoft Administering Windows Server 2012 certification by passing exam 70-411 then you can pass it in one go.
Google drive latest Microsoft 70-411 dumps pdf: https://drive.google.com/open?id=16rZh5hs95aHUJmV_s6aDErcA0cfvCWsa
Google drive latest Microsoft 70-461 dumps pdf: https://drive.google.com/open?id=190BBhmJIwMAb5jdpjlKcowl1fy3r3kq2
High quality 070-464 dumps PDF questions and answers at leads4pass, latest Microsoft 070-464 dumps pdf training materials.
New Microsoft MCSE 70-411 dumps vce training materials update shared demo to have a free try.
Hot Microsoft MCSE 70-411 Dumps Exam Practice Questions And Answers (1-15)
QUESTION 1
You are a network administrator of an Active Directory domain named contoso.com.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server server role and the Network Policy Server role service installed.
You enable Network Access Protection (NAP) on all of the DHCP scopes on Server1. You need to create a DHCP policy that will apply to all of the NAP non- compliant DHCP clients.
Which criteria should you specify when you create the DHCP policy?
A. The client identifier
B. The user class
C. The vendor class
D. The relay agent information
Correct Answer: B
Explanation:
To configure a NAP-enabled DHCP server
1. On the DHCP server, click Start, click Run, in Open, type dhcpmgmt. smc, and then press ENTER.
2. In the DHCP console, open \IPv4.
3. Right-click the name of the DHCP scope that you will use for NAP client computers, and then click Properties.
4. On the Network Access Protection tab, under Network Access Protection Settings, choose Enable for this scope, verify that Use default Network Access Protection profile is selected, and then click OK.
5. In the DHCP console tree, under the DHCP scope that you have selected, right-click Scope Options, and then click Configure Options.
6. On the Advanced tab, verify that Default User Class is selected next to User class.
7. Select the 003 Router check box, and in IP Address, under Data entry, type the IP address for the default gateway used by compliant NAP client computers, and then click Add.
8. Select the 006 DNS Servers check box, and in IP Address, under Data entry, type the IP address for each router to be used by compliant NAP client computers, and then click Add.
9. Select the 015 DNS Domain Name check box, and in String value, under Data entry, type your organization’s domain name (for example, woodgrovebank. local), and then click Apply. This domain is a full-access network assigned to compliant NAP clients.
10.On the Advanced tab, next to User class, choose Default Network Access Protection Class.
11.Select the 003 Router check box, and in IP Address, under Data entry, type the IP address for the default gateway used by noncompliant NAP client computers, and then click Add. This can be the same default gateway that is used by compliant NAP clients.
12.Select the 006 DNS Servers check box, and in IP Address, under Data entry, type the IP address for each DNS server to be used by noncompliant NAP client computers, and then click Add. These can be the same DNS servers used by compliant NAP clients.
13.Select the 015 DNS Domain Name check box, and in String value, under Data entry, type a name to identify the restricted domain (for example, restricted. Woodgrovebank. local), and then click OK. This domain is a restricted-access network assigned to noncompliant NAP clients.
14.Click OK to close the Scope Options dialog box.
15.Close the DHCP console.
QUESTION 2
Your network contains four Network Policy Server (NPS) servers named Server1, Server2, Servers, and Server4.
Server1 is configured as a RADIUS proxy that forwards connection requests to a remote RADIUS server group named Group1.
You need to ensure that Server2 and Server3 receive connection requests. Server4 must only receive connection requests if both Server2 and Server3 are unavailable.
How should you configure Group1?
A. Change the Weight of Server4 to 10.
B. Change the Weight of Server2 and Server3 to 10.
C. Change the Priority of Server2 and Server3 to 10.
D. Change the Priority of Server4 to 10.
Correct Answer: D
Explanation:
During the NPS proxy configuration process, you can create remote RADIUS server groups and then add RADIUS servers to each group. To configure load balancing, you must have more than one RADIUS server per remote RADIUS server group. While adding group members, or after creating a RADIUS server as a group member, you can access the Add RADIUS server dialog box to configure the following items on the Load Balancing tab:
Priority. Priority specifies the order of importance of the RADIUS server to the NPS proxy server. Priority level must be assigned a value that is an integer, such as 1, 2, or 3. The lower the number, the higher priority the NPS proxy gives to the RADIUS server. For example, if the RADIUS server is assigned the highest priority of 1, the NPS proxy sends connection requests to the RADIUS server first; if servers with priority 1 are not available, NPS then sends connection requests to RADIUS servers with priority 2, and so on. You can assign the same priority to multiple RADIUS servers, and then use the Weight setting to load balance between them.
Weight. NPS uses this Weight setting to determine how many connection requests to send to each group member when the group members have the same priority level. Weight setting must be assigned a value between 1 and 100, and the value represents a percentage of 100 percent. For example, if the remote RADIUS server group contains two members that both have a priority level of 1 and a weight rating of 50, the NPS proxy forwards 50 percent of the connection requests to each RADIUS server.
Advanced settings. These failover settings provide a way for NPS to determine whether the remote RADIUS server is unavailable. If NPS determines that a RADIUS server is unavailable, it can start sending connection requests to other group members. With these settings you can configure the number of seconds that the NPS proxy waits for a response from the RADIUS server before it considers the request dropped; the maximum number of dropped requests before the NPS proxy identifies the RADIUS server as unavailable; and the number of seconds that can elapse between requests before the NPS proxy identifies the RADIUS server as unavailable.
The default priority is 1 and can be changed from 1 to 65535. So changing server 2 and 3 to priority 10 is not the way to go.
QUESTION 3
Your network contains an Active Directory domain named adatum.com.
A network administrator creates a Group Policy central store.
After the central store is created, you discover that when you create new Group Policy objects (GPOs), the GPOs do not contain any Administrative Templates.
You need to ensure that the Administrative Templates appear in new GPOs.
What should you do?
A. Add your user account to the Group Policy Creator Owners group.
B. Configure all domain controllers as global catalog servers.
C. Copy files from %Windir%\Policydefinitions to the central store.
D. Modify the Delegation settings of the new GPOs.
Correct Answer: C
Explanation:
To take advantage of the benefits of .admx files, you must create a Central Store in the SYSVOL folder on a domain controller. The Central Store is a file location that is checked by the Group Policy tools. The Group Policy tools use any .admx files that are in the Central Store. The files that are in the Central Store are later replicated to all domain controllers in the domain.
QUESTION 4
Your network contains two Active Directory forests named contoso.com and dev.contoso.com. The contoso.com forest contains a domain controller named DC1. The dev.contoso.com forest contains a domain controller named DC2. Each domain contains an organizational unit (OU) named OU1.
Dev.contoso.com has a Group Policy object (GPO) named GPO1. GPO1 contains 200 settings, including several settings that have network paths. GPO1 is linked to OU1. 70-411 dumps
You need to copy GPO1 from dev.contoso.com to contoso.com.
What should you do first on DC2?
A. From the Group Policy Management console, right-click GPO1 and select Copy.
B. Run the mtedit.exe command and specify the /Domaintcontoso.com /DC: DC 1 parameter.
C. Run the Save-NetGpocmdlet.
D. Run the Backup-Gpocmdlet.
Correct Answer: A
Explanation:
To copy a Group Policy object:
In the GPMC console tree, right-click the GPO that you want to copy, and then click Copy. To create a copy of the GPO in the same domain as the source GPO, right-click Group Policy objects, click Paste, specify permissions for the new GPO in the Copy GPO box, and then click OK.
For copy operations to another domain, you may need to specify a migration table.
The Migration Table Editor (MTE) is provided with Group Policy Management Console (GPMC) to facilitate the editing of migration tables. Migration tables are used for copying or importing Group Policy objects (GPOs) from one domain to another, in cases where the GPOs include domain-specific information that must be updated during copy or import.
Source WS2008R2: Backup the existing GPOs from the GPMC, you need to ensure that the “Group Policy Objects” container is selected for the “Backup Up All” option to be available.
Copy a Group Policy Object with the Group Policy Management Console (GPMC)
You can copy a Group Policy object (GPO) either by using the drag-and-drop method or right-click method.
Applies To: Windows 8, Windows Server 2008 R2, Windows Server 2012
QUESTION 5
Your network contains an Active Directory domain named contoso.com.
All user accounts reside in an organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1. You link GPO1 to OU1. You configure the Group Policy preference of GPO1 to add a shortcut named Link1 to the desktop of each user.
You discover that when a user deletes Link1, the shortcut is removed permanently from the desktop.
You need to ensure that if a user deletes Link1, the shortcut is added to the desktop again.
What should you do?
A. Enforce GPO1.
B. Modify the Link1 shortcut preference of GPO1.
C. Enable loopback processing in GPO1.
D. Modify the Security Filtering settings of GPO1.
Correct Answer: B
Explanation:
Replace Delete and recreate a shortcut for computers or users. The net result of the Replace action is to overwrite the existing shortcut. If the shortcut does not exist, then the Replace action creates a new shortcut.
This type of preference item provides a choice of four actions: Create, Replace, Update, and Delete. The behavior of the preference item varies with the action selected and whether the shortcut already exists.
QUESTION 6
You have Windows Server 2012 R2 installation media that contains a file named Install.wim. You need to identify the permissions of the mounted images in Install.wim.
What should you do?
A. Run dism.exe and specify the /get-mountedwiminfo parameter.
B. Run imagex.exe and specify the /verify parameter.
C. Run imagex.exe and specify the /ref parameter.
D. Run dism.exe and specify the/get-imageinfo parameter.
Correct Answer: A
Explanation:
/Get-MountedWimInfo Lists the images that are currently mounted and information about the mounted image such as read/write permissions, mount location, mounted file path, and mounted image index.
QUESTION 7
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and 10 web servers. All of the web servers are in an organizational unit (OU) named WebServers_OU. All of the servers run Windows Server 2012 R2.
On Server1, you need to collect the error events from all of the web servers. The solution must ensure that when new web servers are added to WebServers_OU, their error events are collected automatically on Server1.
What should you do?
A. On Server1, create a source computer initiated subscription. From a Group Policy object (GPO), configure the Configure target Subscription Manager setting.
B. On Server1, create a source computer initiated subscription. From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.
C. On Server1, create a collector initiated subscription. From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.
D. On Server1, create a collector initiated subscription. From a Group Policy object (GPO), configure the Configure target Subscription Manager setting.
Correct Answer: A
Explanation:
Source-initiated subscriptions allow you to define a subscription on an event collector computer without defining the event source computers, and then multiple remote event source computers can be set up (using a group policy setting) to forward events to the event collector computer. This differs from a collector initiated subscription because in the collector initiated subscription model, the event collector must define all the event sources in the event subscription.
1. Run the following command from an elevated privilege command prompt on the Windows Server domain controller to configure Windows Remote Management: winrm qc -q.
2. Start group policy by running the following command: %SYSTEMROOT%\System32\gpedit. msc.
3. Under the Computer Configuration node, expand the Administrative Templates node, then expand the Windows Components node, then select the Event Forwarding node.
4. Right-click the SubscriptionManager setting, and select Properties. Enable the SubscriptionManager setting, and click the Show button to add a server address to the setting. Add at least one setting that specifies the event collector computer. The SubscriptionManager Properties window contains an Explain tab that describes the syntax for the setting.
5. After the SubscriptionManager setting has been added, run the following command to ensure the policy is applied: gpupdate /force. If you want to configure a source computer-initiated subscription, you need to configure the following group policies on the computers that will act as the event forwarders:
* (A) Configure Target Subscription Manager This policy enables you to set the location of the collector computer.
QUESTION 8
Your network contains a Hyper-V host named Hyperv1. Hyperv1 runs Windows Server 2012 R2.
Hyperv1 hosts four virtual machines named VM1, VM2, VM3, and VM4. AH of the virtual machines run Windows Server 2008 R2.
You need to view the amount of memory resources and processor resources that VM4 currently uses.
Which tool should you use on Hyperv1?
A. Windows System Resource Manager (WSRM)
B. Task Manager
C. Hyper-V Manager
D. Resource Monitor
Correct Answer: C
Explanation:
Hyper-V Performance Monitoring Tool
Know which resource is consuming more CPU. Find out if CPUs are running at full capacity or if they are being underutilized. Metrics tracked include Total CPU utilization, Guest CPU utilization, Hypervisor CPU utilization, idle CPU utilization, etc.
WSRM is deprecated starting with Windows Server 2012
QUESTION 9
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The functional level of both the domain and the forest is Windows Server 2008 R2.
The domain contains a domain-based Distributed File System (DFS) namespace that is configured as shown in the exhibit. (Click the Exhibit button.)
You need to enable access-based enumeration on the DFS namespace.
What should you do first?
A. Raise the domain functional level.
B. Raise the forest functional level.
C. Install the File Server Resource Manager role service on Server3 and Server5.
D. Delete and recreate the namespace.
Correct Answer: D
Explanation:
Access-based enumeration is only supported on a Domain-based Namespace in Windows Server 2008 Mode. This type of Namespace requires a minimum Windows Server 2003 forest functional level and a minimum Windows Server 2008 domain functional level.
The exhibit indicates that the current namespace is a Domain-based Namespace in Windows Server 2000 Mode. To migrate a domain-based namespace from Windows 2000 Server mode to Windows Server 2008 mode, you must export the namespace to a file, delete the namespace, recreate it in Windows Server 2008 mode, and then import the namespace settings.
QUESTION 10
You have a server named Server1 that runs Windows Server 2012 R2.
An administrator creates a quota as shown in the Quota exhibit. (Click the Exhibit button.)
You run the dir command as shown in the Dir exhibit. (Click the Exhibit button.)
You need to ensure that D:\Folder1 can only consume 100 MB of disk space.
What should you do?
A. From File Server Resource Manager, create a new quota.
B. From File Server Resource Manager, edit the existing quota.
C. From the Services console, set the Startup Type of the Optimize drives service to Automatic.
D. From the properties of drive D, enable quota management.
Correct Answer: A
Explanation:
1. In Quota Management, click the Quota Templates node.
2. In the Results pane, select the template on which you will base your new quota.
3. Right-click the template and click Create Quota from Template (or select Create Quota from Template from the Actions pane). This opens the Create Quota dialog box with the summary properties of the quota template displayed.
4. Under Quota path, type or browse to the folder that the quota will apply to.
5. Click the Create quota on path option. Note that the quota properties will apply to the entire folder.
Note: To create an auto apply quota, click the Auto apply template and create quotas on existing and new subfolders option. For more information about auto apply quotas, see Create an Auto Apply Quota.
6. Under Drive properties from this quota template, the template you used in step 2 to create your new quota is preselected (or you can select another template from the list). Note that the template’s properties are displayed under Summary of quota properties.
7. Click Create.
Create a new Quota on path, without using the auto apply template and create quota on existing and new subfolders.
QUESTION 11
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2.
DC1 is backed up daily. The domain has the Active Directory Recycle Bin enabled.
During routine maintenance, you delete 500 inactive user accounts and 100 inactive groups. One of the deleted groups is named Group1. Some of the deleted user accounts are members of some of the deleted groups.
For documentation purposes, you must provide a list of the members of Group1 before the group was deleted.
You need to identify the names of the users who were members of Group1 prior to its deletion.
You want to achieve this goal by using the minimum amount of administrative effort.
What should you do first?
A. Mount the most recent Active Directory backup.
B. Reactivate the tombstone of Group1.
C. Perform an authoritative restore of Group1.
D. Use the Recycle Bin to restore Group1.
Correct Answer: A
Explanation:
The Active Directory Recycle Bin does not have the ability to track simple changes to objects. If the object itself is not deleted, no element is moved to the Recycle Bin for possible recovery in the future. In other words, there is no rollback capacity for changes to object properties, or, in other words, to the values of these properties.
QUESTION 12
Your network contains an Active Directory domain named contoso.com. All domain controllers run either Windows Server 2008 or Windows Server 2008 R2. 70-411 dumps
You deploy a new domain controller named DC1 that runs Windows Server 2012 R2.
You log on to DC1 by using an account that is a member of the Domain Admins group.
You discover that you cannot create Password Settings objects (PSOs) by using Active Directory Administrative Center.
You need to ensure that you can create PSOs from Active Directory Administrative Center.
What should you do?
A. Modify the membership of the Group Policy Creator Owners group.
B. Transfer the PDC emulator operations master role to DC1.
C. Upgrade all of the domain controllers that run Window Server 2008.
D. Raise the functional level of the domain.
Correct Answer: D
Explanation:
Fine-grained password policies allow you to specify multiple password policies within a single domain so that you can apply different restrictions for password and account lockout policies to different sets of users in a domain. To use a finegrained password policy, your domain functional level must be at least Windows Server 2008. To enable fine-grained password policies, you first create a Password Settings Object (PSO). You then configure the same settings that you configure for the password and account lockout policies. You can create and apply PSOs in the Windows Server 2012 environment by using the Active Directory Administrative Center (ADAC) or Windows PowerShell.
Step 1: Create a PSO
Applies To: Windows Server 2008, Windows Server 2008 R2
QUESTION 13
Your network contains an Active Directory domain named contoso.com. The Active Directory Recycle bin is enabled for contoso.com.
A support technician accidentally deletes a user account named User1. You need to restore the User1 account.
Which tool should you use?
A. Ldp
B. Esentutl
C. Active Directory Administrative Center
D. Ntdsutil
Correct Answer: C
QUESTION 14
Your network contains an Active Directory domain named contoso.com. The domain contains a read-only domain controller (RODC) named RODC1.
You create a global group named RODC_Admins.
You need to provide the members of RODC_Admins with the ability to manage the hardware and the software on R0DC1. The solution must not provide RODC_Admins with the ability to manage Active Directory objects.
What should you do?
A. From Active Directory Site and Services, configure the Security settings of the RODC1 server object.
B. From Windows PowerShell, run the Set-ADAccountControlcmdlet.
C. From a command prompt, run the dsmgmt local roles command.
D. From Active Directory Users and Computers, configure the Member Of settings of the RODC1 account.
Correct Answer: C
Explanation:
RODC: using the dsmgmt.exe utility to manage local administrators
One of the benefits of RODC is that you can add local administrators who do not have full access to the domain administration. This gives them the ability to manage the server but not add or change active directory objects unless those roles are delegated. Adding this type of user is done using the dsmdmt.exe utility at the command prompt.
QUESTION 15
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
In a remote site, a support technician installs a server named DC10 that runs Windows Server 2012 R2. DC10 is currently a member of a workgroup.
You plan to promote DC10 to a read-only domain controller (RODC).
You need to ensure that a user named Contoso\User1 can promote DC10 to a RODC in the contoso.com domain. The solution must minimize the number of permissions assigned to User1.
What should you do?
A. From Active Directory Users and Computers, run the Delegation of Control Wizard on the contoso.com domain object.
B. From Active Directory Administrative Center, pre-create an RODC computer account.
C. From Ntdsutil, run the local roles command.
D. Join DC10 to the domain. Run dsmod and specify the /server switch.
Correct Answer: B
Explanation:
A staged read only domain controller (RODC) installation works in two discrete phases:
1. Staging an unoccupied computer account
2. Attaching an RODC to that account during promotion
What Our Customers Are Saying:
Practice for your Microsoft 70-411 exam with the help of leads4pass, new Microsoft MCSE 70-411 dumps pdf practice files and study guides free download. Useful Microsoft MCSE https://www.leads4pass.com/70-411.html dumps pdf training resources which are the best for clearing 70-411 exam test, and to get certified by Microsoft MCSE. 100% passing guarantee and full refund in case of failure.
Latest Microsoft MCSE 70-411 dumps vce youtube demo:
Why Choose leads4pass?
leads4pass is the best provider of IT learning materials and the right choice for you to pass Microsoft 70-411 exam. Other brands started earlier, but the questions are not the newest and the price is relatively expensive. leads4pass provide the latest real and cheapest questions and answers, help you pass Microsoft 70-411 exam easily at first try.
